Showing posts with label American-Welsh americymru art Canadian Canadian-Welsh carving David Western Eisteddfod lovespoon oregon portland sculpture Wales Welsh Welsh-American Welsh-Canadian woodcarving Valentines Day. Show all posts
Showing posts with label American-Welsh americymru art Canadian Canadian-Welsh carving David Western Eisteddfod lovespoon oregon portland sculpture Wales Welsh Welsh-American Welsh-Canadian woodcarving Valentines Day. Show all posts

Saturday, May 15, 2010

A Nice Diversion!

Bookmark and Share


Today I'm stepping away from the cerebral stresses of lovespoon design so that I can get back to the more elemental pleasures of playing with wood and heavy tools that go 'thwack' when you use them!
Laura and I are on the prowl for a nice piece of wood for the Eisteddfod spoon so I thought I would have a look at some broadleaf maple I have been storing for a couple of years.The wood is still in log form, so I am going to split out some little planks with a mallet and froe. This is the same method used by roofers to make shingles and shakes. Basically it involves whalloping a sturdy steel blade (the froe) with a lead or heavy wood mallet to drive it through the block and split off slabs.

Sometimes it is easier said than done... especially if there are hidden knots inside the block. Ultimately though, it gives the best slab of wood for carving as the direction the piece splits shows exactly how the grain of the wood is running within the tree.




If things go to plan and the block isn't harbouring any unwanted annoyances, the slab will separate nice and neatly and you will be left with a fairly tidy piece of carvable wood!

Once the board is separated from the block, it can be leveled and cleaned-up as desired, either by some judicious axe-work or by running it over the jointer. Because I am ever-so-slightly lazy, I generally opt for the jointer, but if I am feeling 'back to the landish' I will sometimes use the axe or a hand held plane to tidy things up.
With the board nicely planed, I can get a really good look at the grain and check to see if there is any figure to it or anything of interest. Most carvers prefer to have pretty plain and uniform grain so that the wood will be more predicable and the carving goes easier. Because I have always been obtuse, I like it to have some figure and some zing to the grain pattern. This generally means I get a bit more of a fight from the wood, but the end results are generally worth the tussle! In this case, the wood is fairly uniform in its grain orientation and there isn't much in the way of figure, but it has some spalting (fine dark lines) which might go well with our design. We'll see how Laura feels about it and will compare it to some nice pieces of myrtle wood she has just been given. Although I am a big fan of maple, the thought of myrtle wood for a spoon destined for Oregon has some allure too. Stay tuned!
And please also consider making a donation to the Left Coast Eisteddfod. Your contribution (no matter how big or small) will help produce this exciting Welsh cultural event and will give you the opportunity to win the completed spoon!!
- Dave

Wednesday, February 11, 2009

Back to the Knives as Valentines Approaches!

I'll wager that I'm not the only one who has the knives out on Valentine's Day! Mind you, I'll be carving a beautiful love token for a loving couple and not planning to moyderize someone for forgetting the big day!

In fact, I've been so busy with the knives frantically trying to get Valentine's orders in time for delivery on the 14th, that I haven't had a minute to spare for the Left Coast Eisteddfod spoon.

While I apologize for that, I did have time to answer a couple of questions that have come to me via email. A number of people have written to me asking what tools I use when carving my lovespoons. In particular they are interested in the power tools I use to save time and turn out spoons in double-quick time.

I'm sorry to disappoint, but the only power tools I make use of are an electric band saw for roughing my timber to size, an electric scroll saw to rough out the actual spoon blank (especially if there is a lot of Celtic knotwork involved) and very occasionally I will utilize a 4.5-inch angle grinder (!!) to sand my way through difficult grain figures. Other than that, it is all hand tools. I've included a picture of my workbench to show the tools necessary for carving the Left Coast Eisteddfod lovespoon. The vast bulk of my work is done with one or two straight and bent bladed knives. I use some small chisels and gouges to get into tight spots, some needle files for cleaning rough spots and lots of stropping compound and stropping to keep things sharp as I go. Those with keen eyes will notice two other necessities on the bench; glues for those little disasters which occasionally befall even the noblest venture and my collection of Simpsons characters who are present to help me laugh my way through those same ignoble disasters!

I'd love to be able to tell you that there are miracle tools out there which make things go super-quick and smooth, but really there are no finer tools than the ones you see in this picture.
Even though I have to work at a brisk pace if I want to survive, I firmly believe that a carving takes as long as it takes and trying to shortcut anywhere only leads to a half-hearted looking lovespoon.

The second most common question I am asked is: "How do you sit and carve for 8 hours straight every day?" The answer is proper nutrition! I've included this photo taken during my Christmas visit to Cardiff where I was able to stock up on the very type of nutrition which fortifies me so heartily for the upcoming season of lovespoon carving! The key, as with so many things, is moderation. As you can see from the picture, I am careful not to over-do things.

Any former or current citizen of Cardiff can tell you that with two simple foodstuffs, Clark's Pies and Brains Beer, the body can be sufficiently and efficiently fed to perform at peak performance! Add a half and half curry on the way home and you're set!!

So there you are, my Valentine's Day gift to any and all you carvers out there seeking the secret to woodcarving success.

Next week, we'll resume action on the Left Coast Eisteddfod lovespoon but in the meantime, why not consider a romantic donation to the Eisteddfod in your sweetie's name? It's a great gift which might net this one-of-a-kind, hand-carved lovespoon!



Bookmark and Share